CC1101 Module for Flipper Zero – Sub-GHz Range Extender PCB Board with GPIO Connector in 3D Printed Case 315MHz 433MHz 868MHz 915MHz

Product Description

This item is 100% legal to use! Use on your own devices for legal purposes only.

If you’re looking for a compatible CC1101 module for your fully customized Flipper Zero, you’ve come to the right place.

The set is built and assembled with the utmost care.

What if you use a silicone case with your Flipper Zero? Don’t worry, you’ll be able to connect it without removing it.

Plus, you can now choose the color of the product!

_____________________________________________________

Characteristics:

* CC1101 board mounted on 5v powered circuitry to avoid interference generated by the 3.3v port and to make the signal cleaner, without noise.

* 3dBi antenna

* Longer connection pins to connect the module without removing the silicone case.

* Green LED indicates whether the module is working (receiving power)

* The CC1101 can operate on any frequency within the 300 to 348 MHz, 387 to 464 MHz, and 779 to 928 MHz bands. This includes the license-free ICM band (check your country’s regulations regarding the use of permitted frequency bands).

_____________________________________________________

Before buying:

* Colors may vary slightly (difference in shade between photo and actual product)

* ATTENTION! If your shipping address is not located in Spain, you may be subject to customs and/or tariff fees, which are NOT covered by the purchase price in most cases (unless Etsy indicates otherwise during the checkout process).

* THE PURCHASE DOES NOT INCLUDE THE FLIPPER ZERO IN THE PHOTO.

* Please note that this article is for legal use on your own device.